In a word, comfort. In another, support. Our Pillowtop Hammocks offer an abundant excess of both, far beyond what you’re used to even with the best rope or quilted-fabric hammocks.
Incomparable relaxation constructions, our Pillowtops offer exquisite plushness paired with a level of lumbar support formerly unheard of in a hammock.
So yes, our Pillowtop Hammocks certainly do look different than you’re used to — but wow do they ever feel different than you’re used to, too!
They look, and feel, in a word, phenomenal.
The Hatteras Hammocks® Midori Indigo Pillowtop Hammock is two layers of industry-leading synthetic Sunbrella® and DuraCord® fabric lock stitched into seven individual horizontal pillows atop a thick center of nonabsorbent polyester hollow fill fiber manufactured from recycled plastic drink bottles. The top fabric layer is the charming Sunbrella Midori Indigo, while the bottom and side-binding are a DuraCord solid navy color.
Not only is the craftsmanship of our hammocks the highest level of quality, but we also choose the highest quality outdoor fabrics as well. We use a combination of Sunbrella® Fabric and our in-house brand DuraCord® Fabric. Sunbrella branded fabric is the foremost fabric in the outdoor industry made from 100% solution dyed acrylic. Solution-dyed acrylic, which means the fibers of the fabric are dyed in color before they are woven into the fabric. Sunbrella is not printed or dyed after the fabric is made. Sunbrella® is water resistant and will not fade. You can even soak it in bleach and the color will remain the same. Which is why to use Sunbrella® fabric on the tops of our hammocks. DuraCord® is not only fast-drying but is also resistant to rot, mold, mildew, and staining, as well as Sunbrella. We use the DuraCord Fabric on the bottom of our Fabric Hammocks because has better abrasion resistance than Sunbrella.
Our own proprietary solution-dyed synthetic blend of rope, DuraCord, blends the softness of cotton with the durability of polyester. Made in the Carolinas, this combination yields a rope that has excellent color steadfastness and superior feel. DuraCord is dyed when spun, producing a rope that is colored all the way through. Like a carrot when sliced open, DuraCord has the same color on both the inside and the outside. Our DuraCord rope is the densest rope on the hammock market at 85 ft./lb., this results in less stretching and increased support when relaxing in your hammock.
Cumaru Spreader Bar
A Brazilian hardwood similar to teak, Cumaru, is 5 times harder and denser than pine, cedar, and redwood. Exclusive to Hatteras Hammocks, our Cumaru hardwood has a history of outstanding outdoor performance. Even after years of use, our Cumaru hardwood ages naturally to a beautiful silver grey without losing any of its durability. Our Cumaru Spreader bars are a full 1 inch thick, compared to most other competitor’s spreader bars that measure at ⅞ inch. A thicker spreader bar allows more holes for rope, allowing the hammock bed to sit firmly on the hammock. Our spreader bars also feature countersink drilled holes. Countersink drilling is a technique that uses a trumpet drill bit that produces a hole with no hard angles, allowing the rope to pass through without any sharp edges to wear the rope.
Rolled Rim Grommets with Spur Washers
We are very particular with every aspect of our hammocks even down to the grommets on all our fabric hammocks. Every grommet we use has tiny spurs on the back of the connecting washer forcing part of the fabric into the lip of the grommet itself, creating a more secure bond. We have also experimented with making the fabric around the grommet stronger by sewing an “X” on the fabric before placing the grommet, by adding that extra stitching it gives those tiny spurs more fabric to grip onto. The industry standard, however, is the telescoping grommet, which our testing has shown rips lose from fabric before the rolled-rim grommet every time.
Made from recycled soda bottles, our polyester fiberfill is stuffed between two layers of durable fabric. The recycled fiberfill is non-absorbent, allowing water to drain easily and provide quick dying. Our goal is to repurpose recyclable materials as much as possible and leave a smaller carbon footprint.
We plate all our hanging hardware with Zinc Plated Coating, including both tree hooks that come standard with our hammocks. The zinc plated coating prevents the accumulation of rust and ensures a longer outdoor life. Our very own One-piece ring-knot and chain, a product of years of development, permanently attaches the chain to the O-ring. This produces a hammock that is more durable and most importantly makes it impossible to lose the chain.
STANDS and PILLOWS SOLD SEPERATELY!
|Specifications and Rating - Hatteras Pillowtop Hammock – Midori Indigo|
|Thickness||3.5 in. 5 in. at thickest point|
|Bed Length||6ft 10in.|
|Weight Capacity||450 lbs|
|Hardware||Zinc Plated Steel|
There are no reviews yet.